Advantage Fabricated Metals - metal stamping services  
Advantage Fabricated Metals home Site map Contact Advantage Fabricated Metals
Advantage Fabricated Metals - We invest in our customers   Call Advantage Fabricated Metals at 1-773-650-1390 to speak to a custom metal fabricating service representative.
 
About Advantage Fabricated Metals
Services
Materials
Benefits
Frequently Asked Questions
Glossary
Tips and Facts
Links and resources
Metal forming and metal fabricating - photo

Home > Metal Forming Services > Metal Stamping

Metal stamping services

Metal stamping is the forming of metals using pressure into the surface of a metal, usually strip or sheet.

To view details about our metal stamping services, please select one of the links below:

Metal Stamping Overview

Advantage Fabricated Metals offers significant metal stamping services for Original Equipment Manufacturers (OEMs). Our goal is to offer solutions to metal stamping and metal fabrication problems that provide our customers with definite competitive and financial advantages.

Advantage Fabricated Metals customers have no need to outsource their tooling, machining, and finishing functions to multiple vendors. We provide turnkey metal stamping and metal fabricating services whether the tooling already exists or we have to create the tooling.

We will meet your stamping tooling needs whether your project requires temporary or permanent dies, fixtures, or jigs, we will build them for an order, then store and maintain the tooling for future stamping production runs. Advantage Fabricated Metals does not charge our customers for tooling storage!

We pride ourselves on providing our metal stamping customers with practical, cost-saving, and market competitive recommendations from a production perspective on both new and existing parts. We pride ourselves on being innovative solutions providers and problem solvers for our metal stamping customers.

top

Stamping Tonnage and Gauge

We offer metal stamping presses that range from 150 to 300 tons and we can stamp steel and other metals up to a gauge of 1/4"!

Tolerance

We can hold the most critical tolerances at Advantage Fabricated Metals. We can hold stamping tolerances as close as +/-0.005".

Bed Size/Part Size

Currently, we can stamp any component that requires a part or bed size of 36" x 48".

Materials Stamped

Advantage Fabricated Metals stamps all the common metals, and a few that many stampers shy away from.

We will stamp your OEM components from any of the following metals and metal alloys:

  • Aluminum (All Alloys)
  • Aluminum (T1/T2)
  • Brass
  • Cold Rolled Steel
  • Copper
  • Galvanized Steel
  • High Strength, Low Alloy, Steel
  • Hot Rolled Steel
  • Stainless Steel
  • Steel (All Alloys)
  • Titanium
  • Zinc

top

Stamping Press Speeds

Our stamping press speeds vary between 35 to 70 strokes per minute.

Coil Size

Advantage Fabricated Metals' stamping presses can handle coils up to 20,000 pounds.

Tooling Options

Advantage Fabricated Metals provides turnkey operations. We'll take a customer's existing tooling and run production or we will take on a project from the ground up creating the necessary tooling. We will pay for tooling, since we invest in our customers!

Run Size/Volume

Please inquire! At Advantage Fabricated Metals, we believe in handling customer needs. Our production runs have no set limits. Please call us to discuss your needs at 1-815-323-1310. We can meet your needs!

back to services index

For more information about Advantage Fabricated Metals and the metal stamping services we provide, please fill out our contact form or call us at 1-815-323-1310.


Advantage Fabricated Metals
a division of Corrugated Metals, Inc.
We invest in our customers.™
3575 Morreim Drive • Belvidere, Illinois 61008
Phone: 1-815-323-1310 • Fax: 1-815-323-1317
Email: info@advantagefabricatedmetals.com

*
Fill out our contact form or speak directly to a custom metal fabricating or welding services representative at: 1-815-323-1310.

Related links:

*